- AutorIn
- Jithinraj Edaklavan Koroth Faculty of Mechanical Engineering, University of Ljubljana
- Maxime DebardNational School of Engineers of Saint-Etienne
- Josko ValentincicFaculty of Mechanical Engineering, University of Ljubljana
- Titel
- Influence of electrolyte flow on plasma electrolytic polishing of additively manufactured lattice structures
- Zitierfähige Url:
- https://nbn-resolving.org/urn:nbn:de:bsz:ch1-qucosa2-997902
- Konferenz
- 21st International Symposium on Electrochemical Machining Technology INSECT 2025. Chemnitz, 03./04.11.2025
- Quellenangabe
- 21st International Symposium on Electrochemical Machining Technology INSECT 2025
- DOI
- https://doi.org/10.51382/978-3-96100-259-7-18
- Abstract (EN)
- Additive manufacturing enables the production of complex geometries such as lattice structures, widely used in aerospace and medical applications for their high strength-to-weight ratio. However, achieving a high-quality surface finish on internal features remains a challenge. Plasma electrolytic polishing (PEP) offers a promising solution. The process is like electro chemical machining (ECM), but the electrolytes are low concentration salts dissolved in water and with much higher voltage, hence the vapor-gaseous envelope is formed around the workpiece. The Faraday effect limits the polishing of lattice structures but forced electrolyte flow may improve the polishing of internal structures. This study investigates the effect of flushing through a BCC lattice structure using a custom nozzle during PEP. Cross-sectional analysis of lattice structures shows that 4 l min-1 flow achieved the greatest material removal across all layers. Increasing the flow rate resulted in lower material removal rate, most likely due to the disruption of the vapor-gaseous envelope. The results, supported by strut diameter evolution across layers, emphasize the importance of optimizing electrolyte flow to effectively polish internal features.
- Freie Schlagwörter (DE)
- PEP
- Klassifikation (DDC)
- 620
- Normschlagwörter (GND)
- Abtragen, Elektrochemisches Abtragen, Polieren, Elektropolieren, Oberflächenbehandlung
- Herausgeber (Institution)
- Technische Universität Chemnitz, Chemnitz
- Version / Begutachtungsstatus
- angenommene Version / Postprint / Autorenversion
- URN Qucosa
- urn:nbn:de:bsz:ch1-qucosa2-997902
- Veröffentlichungsdatum Qucosa
- 29.10.2025
- Dokumenttyp
- Konferenzbeitrag
- Sprache des Dokumentes
- Englisch
- Lizenz / Rechtehinweis
CC BY 4.0