- AutorIn
- M.Sc. M.Sc. Clemens Müller Fraunhofer-Institut für Produktionstechnologie IPT, Aachen
- Dr.-Ing. Henning JanssenFraunhofer-Institut für Produktionstechnologie IPT, Aachen
- Prof. Dr.-Ing. Christian Brecher
- Titel
- Hot forming of metallic bipolar plates using conductive heating
- Zitierfähige Url:
- https://nbn-resolving.org/urn:nbn:de:bsz:ch1-qucosa2-764479
- Übersetzter Titel (DE)
- Warmumformung metallischer Bipolarplatten mittels konduktiver Erwärmung
- Konferenz
- FC³ Fuel Cell Conference. Chemnitz, 31.05./01.06.2022 (ursprünglicher Termin: 23./24.11.2021)
- Quellenangabe
- FC³ - 2nd Fuel Cell Conference Chemnitz 2022 - Saubere Antriebe. Effizient Produziert.
- Abstract (DE)
- Zur Vergrößerung der umformbaren Kanaltiefe von metallischen Bipolarplatten wurde eine Erwärmungstechnologie mit dem Umformprozess kombiniert. Zur Anwendung eines schnellen Erwärmungsprozesses wurde die elektrische Widerstandserwärmung gewählt und in ein Umformwerkzeug integriert. Mit der Warmumformung sowie einem zweistufigen Umformprozess mit Zwischenglühen wurden zwei unterschiedliche Prozessrouten analysiert. Die Ergebnisse zeigen, dass die Technologie der Widerstandserwärmung für eine Verbesserung der umformbaren Kanaltiefe geeignet ist. Für beide Prozessrouten konnte eine Erhöhung der Umformtiefe nachgewiesen werden. Bei der Warmumformung konnte die Kanaltiefe in Abhängigkeit der geometrischen Parameter des Werkzeugs sowie des Temperaturzustands des Blechs um bis zu 50% verbessert werden.
- Abstract (EN)
- A heating technology was combined with forming processes to enlarge the formable channel depth of metallic bipolar plates in two process routes. To apply a rapid heating process, electrical resistance heating was chosen and integrated into a forming tool. With a hot forming as well as a two-stage forming process with annealing, two different process routes are presented. According to the results, the technology of resistance heating is well suited for the improvement of the formable channel depth. For both process routes, an increase in forming depth was demonstrated. In hot forming, the channel depth could be improved by up to 50% depending on geometrical parameters of the tool as well as the state of temperature of the sheet.
- Freie Schlagwörter (DE)
- metallische Bipolarplatte, konduktive Erwärmung
- Freie Schlagwörter (EN)
- Forming, metallic bipolar plate, sheet metal working, conductive heating
- Klassifikation (DDC)
- 600
- 620
- Normschlagwörter (GND)
- Brennstoffzelle, Umformen, Bipolarplatte, Blechbearbeitung, Widerstandserwärmung
- Herausgeber (Institution)
- Technische Universität Chemnitz
- Version / Begutachtungsstatus
- angenommene Version / Postprint / Autorenversion
- URN Qucosa
- urn:nbn:de:bsz:ch1-qucosa2-764479
- Veröffentlichungsdatum Qucosa
- 27.05.2022
- Dokumenttyp
- Konferenzbeitrag
- Sprache des Dokumentes
- Englisch
- Lizenz / Rechtehinweis